TWILL Technology · East Palo Alto

We build things that matter.

Circuits, firmware, control loops, software, mechanisms and the patents behind them, woven together by one small team, from first sketch to shipping product.

Consumer hardwareMedical devicesRoboticsEmbedded AIOpen source

What we do

Every layer of the stack, in one room.

Most products fail at the seams between disciplines. We work all of them ourselves, so the board, the firmware, the control loop and the app are designed for each other.

01Electronics

Schematics and PCB layout from microcontroller boards to motor drives and power conversion, brought up on our own bench.

Altium · buck/boost · clocks · BLDC drives

02Firmware

Bare-metal and RTOS firmware that is small, fast and debuggable, down to the linker script and the bootloader.

C/C++ · assembly · ARM · ESP32 · AVR

03Controls & robotics

Real-time control and estimation for things that move: motors, balancing machines, mobile robots and medical actuators.

BLDC · Kalman · Kane · full-state feedback

04Software & AI

The apps, cloud services and real-time interfaces around a device, and AI agents that do real work, on screen and in the physical world.

TypeScript · Node · React · Linux · Claude

05Mechanical & prototyping

CAD, mechanisms and enclosures, and a shop to build them in: 3D printing, metal, wood and fabric.

SolidWorks · 3D print · machining

06Medical devices

Engineering for regulated products: ventilation, surgical tools and diagnostics, with an eye on the patents and the regulatory path.

510(k) / PMA planning · IP strategy

01 / 10Our origin · Personal mobility

The TWILL

Where our name comes from

A two-wheeled, all-electric car that leans like a motorcycle: the project our company is named after.

TWILL began as a narrow, fully enclosed, freeway-legal electric car for the 92% of miles people drive alone. Building it taught us the whole stack, from motor control to mechanics, that we now bring to every client.

  • Vehicle dynamics
  • Controls
  • Power electronics
02 / 10Robotics · Autonomous delivery

Last Mile Robotics

Our robotics venture

Delivery robots that ride the edge of the road like bicycle messengers, balancing on two wheels in a line.

A robot that balances like a bicycle and steers like one, so it can go where a courier on a bike goes. Our demonstrator stands a meter tall, is only 4.5 cm wide, and delivers manila folders around the shop.

  • Robotics
  • Controls
  • Firmware
  • Mechanical
03 / 10Consumer hardware · AI

Stickerbox

for Hapiko Inc.

Say it, print it, stick it: a voice-to-sticker toy named one of TIME's Best Inventions of 2026.

Hapiko had the idea and the brand. We engineered the toy: the main circuit board, firmware, enclosure and production test jig, then helped the design through manufacturing.

  • Electronics
  • Firmware
  • Mechanical
  • DFM
  • Test
04 / 10Medical devices · Respiratory

8B Medical

Founding engineers

Ventilation that began as an answer to the pandemic ventilator shortage, now a family of smart respiratory devices.

In 2020 a team of physicians and engineers set out to build a more affordable ventilator. We designed its control, electronics and firmware, and the blower concept behind the Smart Ventilator Mask came out of our shop.

  • Medical devices
  • Controls
  • Electronics
  • Firmware
05 / 10Medical devices · Breast imaging

iSono Health ATUSA

for iSono Health

A wearable 3D breast ultrasound that scans the whole breast by itself in about two minutes, cleared by the FDA in 2022.

Breast ultrasound usually needs a trained sonographer with a hand-held probe. iSono Health's ATUSA does it automatically: the patient wears a soft cup, and a sealed scanner sweeps the transducer through it. We have worked on it since the first prototypes in 2016: the mechanism, the seals, the parts for production, and now the electronics of the next generation.

  • Mechanical
  • Medical devices
  • Manufacturing
  • Electronics
06 / 10Medical devices · Electronics and firmware

Pelvic health devices

for a women's health medical device startup

A handheld therapy device that opens a fraction of a millimeter at a time, and a childbirth device that knows when to stop pushing.

It started in late 2014 as a one-page spec for a motorized therapy device. We designed every one of its circuit boards and wrote all of its firmware, from the first prototype to the first production version, then did the same for a device used during labor that limits its own force.

  • Electronics
  • Firmware
  • Medical devices
  • Manufacturing
07 / 10Connected health · Mobility

CAN Go smart cane

for CAN Mobilities

The first smart, connected walking cane, with fall detection, brought to market with AT&T.

CAN Mobilities set out to build a walking cane that can call for help. We did the early technical work: the electronics and the firmware of its “brain” in the handle, with motion sensing, GPS and an LTE link to an emergency contact.

  • Electronics
  • Firmware
  • Connectivity
08 / 10Transportation · Active suspension

SleepBus

for Cabin (formerly SleepBus)

A hotel on wheels between San Francisco and Los Angeles, with beds that cancel the bumps in the road.

SleepBus, later Cabin, ran an overnight sleeper bus between San Francisco and Los Angeles. We designed its beds, wrote the active controller that holds each one steady while the bus rides over the road, and built the lighting in the berths.

  • Controls
  • Mechanical
  • Electronics
  • Software
09 / 10Research instruments · Cryogenics and high vacuum

Cryogenic optics lab

for a quantum physics research lab

Stages, mounts and wiring for optics experiments in high vacuum, a few degrees above absolute zero.

A quantum physics lab builds optical cavities between the tip of a fiber and a mirror a few microns away, then cools them in dilution refrigerators. Since 2022 we have designed the stages that hold them, the sensors that track them to the nanometer, and the cold wiring that reaches them.

  • Mechanical
  • Electronics
  • Firmware
  • Cryogenics
10 / 10Open source · FIRST Robotics

Tom Sawyer Labs

Our public-benefit lab

Our gift to the FIRST Robotics community, and the home of everything we give away.

Tom Sawyer Labs is where our public-benefit work lives: a full FRC practice field in East Palo Alto where about 20 local high school teams practice and scrimmage, the field system that runs it, and the open-source tools we build along the way.

  • Open source
  • Networking
  • Software
  • Mentoring
And more

We have also helped build…

Not every project is ours to show in full. Some of the other work our engineers have contributed to:

  • Diagnostics · Ruby Robotics

    Robotic cytologist

    Foundational development of a series of concepts for an automated cytology robot, and building its technical team. The company has since been acquired.

  • KNUCKLE DRIVEKNUCKLE DRIVETIPMedical devices

    Prosthetic arm

    An integrated knuckle drive for the fingers of a powered prosthetic arm: motor controllers with magnetic position sensing for proprioception, a CAN network with a field bootloader, and the EMG sensor electronics in the socket.

  • Robotics

    Humanoid robot

    A high-current motor controller, through two board revisions, for the joints of a humanoid robot.

  • Food tech · Trove

    Food robot

    Control electronics and software for a machine that bakes edible food shells: heater power boards, motor control, the cook sequence, and a web interface to run and log it.

  • Food robotics

    Automated kitchen line

    Embedded systems for a robotic restaurant make-line: EtherCAT display and sensor adapters, daisy-chained stepper drivers, and dynamic models for its shaker and ingredient dispensers.

  • Surgical tools · Zimmer Biomet

    Surgical assist arm

    Developed a series of concepts leading to Zimmer Biomet's WalterLorenz® Surgical Assist Arm.

  • Lifts & controls

    Hillside funicular

    A motorized cable funicular up a steep coastal hillside: winch, travel latch, controller and firmware, sealed against salt air.

  • Automotive robotics

    Robotic torque wrench

    A motor-driven impact wrench rig for a tire-changing robot, and the tests that tied delivered torque to the number of hammer blows.

  • Assistive technology

    Laser Finger

    An assistive device built with a 2007 Lemelson-MIT InvenTeam.

  • …and many more under NDA.
Inventions

Our names are on the patents.

Medical devices, power tools, laser levels, a better cup of coffee, a cradle that soothes crying babies, a car that leans like a motorcycle. Our principals are named inventors on dozens of patents, many of them for our clients.

36 of them are drifting past. Pick one.

Contact

Have something hard to build?

Tell us what you are making and where it is stuck. We take on a small number of projects at a time, so every one gets our full attention.

Sometimes what a client needs is a new way to do something: a mechanism nobody has tried, or a way to design around someone else’s patent. That is our favorite kind of problem.

Workshop
2555 Pulgas Ave, Building B
East Palo Alto, CA 94303
Principals
Chris Tacklind · Cameron Tacklind
Public benefit
Tom Sawyer Labs, our open source and FIRST Robotics work